22'0" Dragon MSL Inflatable Paddle Board
- Regular price
- $2,559.00
- Sale price
- $2,559.00
- Regular price
-
$3,199.00 - Unit price
- per
Our retailers are getting frequent deliveries so please contact your local Red stockist as they’ll be able to advise on delivery dates.
Our retailers are getting frequent deliveries so please contact your preferred Red Paddle Co store and they’ll be able to advise on delivery dates for your chosen board.
Extended Warranty
Red Paddle Co boards come with a 2 year warranty from the time of purchase. This can be extended to a 5 year warranty when registered online within 3 months of purchase. This maximum extension is only applicable to new and unused boards from the latest model year.
Total available warranty based on board model year:
- 23/24: 5 years
- 22/23: 4 years
- 21/22: 3 years
This warranty policy applies to boards only. All other items (bags, pumps, paddles, leashes etc) come with a 12 month warranty. See our full terms and conditions for more information.
Free Delivery
For any orders over $150 in value, you'll receive free delivery.
Returns
You can return your items within 30 days of placing your order. Equipment should be un-used and with its original packaging and / or labelling intact and attached to the product. Items which don't have the labelling attached to the product will incur a 10% reconditioning charge which we will notify you after inspection of your return.
If we do not hear back from you within 4 days of contact we will return the items to you. All items are inspected before a refund is processed. Items deemed to be in a poor condition will be returned to you. If any item returned breaches any of the terms outlined in this policy, we reserve the right to return the item back to you in the same condition it was received in.
Description.
Are you ready to rally the troops and create a championship-winning team?
Do you want to mix the intensity of SUP racing with the camaraderie of team spirit?
The four-person Dragon can reach an incredible rate of knots. The 22'0" Dragon retains the same features as most of the Race family, including profiled nose, slim body, and high sides so that it rises out of the water and slices through the waves.
It has eight lateral handles for ease of transport, has four valves for fast inflation and is covered in an extra large deck pad with a large dragon...
Are you ready to rally the troops and create a championship-winning team?
Do you want to mix the intensity of SUP racing with the camaraderie of team spirit?
The four-person Dragon can reach an incredible rate of knots. The 22'0" Dragon retains the same features as most of the Race family, including profiled nose, slim body, and high sides so that it rises out of the water and slices through the waves.
It has eight lateral handles for ease of transport, has four valves for fast inflation and is covered in an extra large deck pad with a large dragon design, warning other competitors to watch out if they don't want to get smoked!
The board is supplied with our glass fibre race fin, designed to provide minimal drag and prevent any debris from getting caught whilst paddling. Don't be duped by its size though: this is one fast machine and with the power of eight arms driving paddles through the water, it is one of the fastest SUPs on the planet!
Sustainability.
At Red, sustainability isn’t just marketing hype – it’s at the core of what we do. As a certified B Corp (www.bcorporation.net) we champion high standards of social and environmental performance, transparency, and accountability.
Fundamentally, our boards are designed and built to last. Our quality-assured Tec Air process has an extremely low warranty rate below 0.5%. Maximising longevity minimises our impact on the planet.
Yet even durable Red kit will eventually reach end-of-life, hence our ‘design for disassembly’ approach. For example, all Titan pump components are replaceable, while using 100% recoverable virgin plastic in our fins, finboxes and RSS battens ensure they’re...
At Red, sustainability isn’t just marketing hype – it’s at the core of what we do. As a certified B Corp (www.bcorporation.net) we champion high standards of social and environmental performance, transparency, and accountability.
Fundamentally, our boards are designed and built to last. Our quality-assured Tec Air process has an extremely low warranty rate below 0.5%. Maximising longevity minimises our impact on the planet.
Yet even durable Red kit will eventually reach end-of-life, hence our ‘design for disassembly’ approach. For example, all Titan pump components are replaceable, while using 100% recoverable virgin plastic in our fins, finboxes and RSS battens ensure they’re fully recyclable.
Our manufacturing processes, like turning the offcuts from our EVA deckpads into keyrings, aim for zero waste too, reflecting our commitment to low-impact resource selection.
Care.
How to store your board
Before storing, rinse all equipment in fresh water and let it dry completely.
To pack away, lay the deflated board deck-up and place the pump across the nose, leaving enough room to wrap the board over. Roll tightly, then secure with the strap. Use the backpack’s internal strap to secure the board inside.
Store your board in a cool, dry place, out of direct sunlight. If keeping it rolled up, avoid excess pressure on the straps. If space allows, it’s best to store the pump separately.
You can also leave your board inflated, ideally kept on a flat surface...
How to store your board
Before storing, rinse all equipment in fresh water and let it dry completely.
To pack away, lay the deflated board deck-up and place the pump across the nose, leaving enough room to wrap the board over. Roll tightly, then secure with the strap. Use the backpack’s internal strap to secure the board inside.
Store your board in a cool, dry place, out of direct sunlight. If keeping it rolled up, avoid excess pressure on the straps. If space allows, it’s best to store the pump separately.
You can also leave your board inflated, ideally kept on a flat surface or upright – but do reduce the board’s pressure to below 15psi if not in use for a while.
Material.
What is MSL®? Safe. Stiff. Durable.
Monocoque Structural Laminate or MSL® is the world’s leading drop-stitch material. Exclusive to Red Paddle Co boards, it’s made to our exact specifications.
Monocoque: meaning the coating is integral to the structure. MSL® drop-stitch technology integrates a highly durable, reinforced coating to the ultra-high-definition weave to form an inseparable base layer.
Structural: the high-tensile drop-stitch fibres are designed to withstand pressures in excess of 22psi, meaning Red boards can be inflated to provide unrivalled stiffness and confidence, no matter the rider weight or prevailing conditions.
Laminate: the reinforced composite coating is bonded to the textile core using machine...
What is MSL®? Safe. Stiff. Durable.
Monocoque Structural Laminate or MSL® is the world’s leading drop-stitch material. Exclusive to Red Paddle Co boards, it’s made to our exact specifications.
Monocoque: meaning the coating is integral to the structure. MSL® drop-stitch technology integrates a highly durable, reinforced coating to the ultra-high-definition weave to form an inseparable base layer.
Structural: the high-tensile drop-stitch fibres are designed to withstand pressures in excess of 22psi, meaning Red boards can be inflated to provide unrivalled stiffness and confidence, no matter the rider weight or prevailing conditions.
Laminate: the reinforced composite coating is bonded to the textile core using machine welding that applies heat and pressure to the inner PVC layer, saving over 2kg of adhesives and reducing cosmetic and safety concerns. Produced under low tension, this process creates a torsional stiffening effect when the boards are inflated, making MSL® stiffer at lower pressures.
Gallery.
Tec Air: Pioneering Paddle Board Design.
Red Paddle Co is the only inflatable SUP brand that makes boards in its own private facility, using innovative materials and manufacturing methods to produce quality kit you won’t find elsewhere. The Tec Air process is how we refine and develop our boards.
We’ve taken standard inflatable technology and reworked almost every aspect of it. By pinpointing key areas, we’ve identified improvements – from the precise bonding of layers to the application of optimum rocker curve, triple-taped reinforced rails to our exclusive MSL® drop-stitch material, no element is overlooked.
Before going into production our designs undergo rigorous research and testing. (We’ve even run tractors and a 22.5-tonne digger over them – they were fine!) Then manufacturing each board takes 72 hours: that’s ten times the industry average. Unlike most other paddleboard companies, we never compromise on quality. It’s this unique Tec Air process that sets us apart.
MSL®: Rock Solid Stiffness..
MSL® is designed to deliver prime performance and full confidence on the water.
Stiffness: Provides an authentic paddling experience. MSL® rigidity improves stability and control, no matter what the water conditions.
Durability: Extremely robust, reinforced outer shell – we even ran it over with a 22-ton digger to prove its reliability: it was fine! Explore for longer with complete peace of mind.
Weight: Superb on-water control whilst remaining durable and transportable. Take it anywhere, in any conditions.
Packability: Simply deflate and roll to fit everything you need for your next adventure in one convenient backpack.
